Clear the lines | Major upgrade of Union Pacific’s rotary snow plows
Special to the Sun
TRUCKEE, Calif. and#8212; The Truckee Donner Railroad Society’s rotary snow plow is about to become even more of a historic artifact.
Union Pacific is rebuilding its rotaries in a way that will change the appearance of the snow-removal machines. The change was prompted by the 2010-11 winter’s heavy snows. More than 58 feet of snow fell on Donner Pass, making it one of the 10th snowiest winters since 1879.
The rotaries are the third line of defense in the railroads’ war against these winter storms.
The first line of defense when snow covers the rails are the yellow, caboose-like flangers. A flanger is so named because a and#8220;flangeand#8221; drops down between the tracks to clear snow from between the rails. When it begins to snow, these short trains run as fast as 35 mph between Truckee and Blue Canyon clearing the rails of snow. The first sign of trouble last winter was when a flanger was derailed by a heavy accumulation of snow.
The second line of defense are spreaders with large and#8220;wingsand#8221; on the side of the units that spread the snow out from the rails. The blades normally keep the snow clear for some distance from the tracks. Most winters this is all that’s required as the flangers and spreaders can keep the line sufficiently clear to provide for continued railroad operation.
Last winter, spreaders were running 24 hours a day, seven days a week. They were pushing snow as high as the cab of the spreader and still appeared to be losing the battle. When a flanger was caught in an avalanche west of Cisco, the Union Pacific had no choice but to bring the rotaries out.
Even then, it took more than a day to open the Union Pacific’s main line over the Sierra. The rotaries hadn’t been used since 1998 because snow levels during that period were such that the flanger/spreader combination was sufficient to keep the tracks clear.
After experiencing the heavy snows of 20 l0-20I l, Union Pacific decided it was time to upgrade the three Roseville rotaries. They are being sent back to the Relco locomotive rebuilding facility in Albia, Iowa. This will be the first major upgrade in more than 60 years.
The entire top section of the rotary will be replaced and new steam generators will be installed. The engineer’s visibility will be improved by placing his position in the center of the cab. The center window is clearest because the rotary blows snow to either side. Lastly, the latest electronics will be added to allow the rotary to be controlled at low speeds.
Because new parts have not been available, rotary SPMW 207 became the source of spare parts for the other two rotaries. It will be the first of the three rotaries to be upgraded. Recently, large cranes in the Roseville yards lowered SPMW 207 on a special low-center flat car for rail transport back to the Iowa rebuilding facility.
and#8212; Submitted to email@example.com. Brendan Compton of BA Productions provided information about the rotary upgrades and railroad operations in the winter of 20l0-201 l.
Support Local Journalism
Support Local Journalism
Readers around Lake Tahoe, Truckee, and beyond make the Sierra Sun's work possible. Your financial contribution supports our efforts to deliver quality, locally relevant journalism.
Now more than ever, your support is critical to help us keep our community informed about the evolving coronavirus pandemic and the impact it is having locally. Every contribution, however large or small, will make a difference.
Your donation will help us continue to cover COVID-19 and our other vital local news.
Start a dialogue, stay on topic and be civil.
If you don't follow the rules, your comment may be deleted.
User Legend: Moderator Trusted User
I just read Tom McClintock’s piece about inflation, and I can’t imagine he lives in the same world as I do. In his mind, sustainable (“green”) energy that offsets climate change is “bad policy.” He…